Table of Contents
Advertisement
Step 3.
Connect the cables to the PCIe cabled riser card.
PCIe cabled riser card
Power connector
1
MCIO 1 connector
2
MCIO 2 connector
3
After this task is completed
• Reinstall the riser assembly to the node. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install drive backplanes
Procedure
Step 1.
Install Backplane 1.
a.
Align Backplane 1 with the guide pins on the riser cage; then, lower Backplane 1 toward the
riser cage until it is firmly seated.
b.
Secure Backplane 1 with three screws.
Figure 272. Installing Backplane 1
Step 2.
Connect the signal cables to the backplanes.
"Install the riser assembly to the node" on page
Chapter 5
259.
.
Hardware replacement procedures
253
Advertisement
Table of Contents
Troubleshooting
