Lenovo ThinkEdge SE360 V2 User Manual page 290

3. If applicable, install the MicroSD card that was removed from the old system board onto the new system
board. See "Install the MicroSD card" on page
4. Reinstall all the memory modules. See
5. Make sure that all components have been reassembled correctly and that no tools or loose screws are
left inside your server.
6. Reinstall the node covers. See
7. If necessary, reinstall the node to the enclosure or mount. See
8. Reconnect the power cords and any cables that you removed.
9. Reset the system date and time.
10. Update the machine type and serial number with new vital product data (VPD). Use the Lenovo XClarity
Provisioning Manager to update the machine type and serial number. See
Data (VPD)" on page
Note: If the node is installed in a ThinkEdge SE360 V2 2U2N Enclosure, change the machine type for
proper operation. See
on page 282.
11. Update the UEFI, XCC and LXPM firmware to the specific version supported by the server. See
the firmware.
12. If applicable, install Lenovo Features on Demand activation key. See the "License Management" section
in the XCC documentation compatible with the server at
13. Update the public key. See the "Update Device Key" section of
pdf/thinkshield-web-application-user-guide-v2.pdf
Notes:
• The role of Lenovo ID should be Maintenance User to update the public key in ThinkShield Key Vault
Portal web interface or ThinkShield mobile app.
• (Lenovo Service only) See
System%20related/ThinkEdge/HowTo_update_PublicKey_after_board_replacement/
14. Set the TPM policy. See
15. Optionally, enable UEFI Secure Boot. See
16. Reconfigure the following ThinkEdge security features if necessary.
a. Change System Lockdown Mode Control status to ThinkShield Portal. See
system" on page 357
b. Enable SED encryption. See
page 272.
c. Recover SED AK. See
272.
d. Enable security features. See
Demo Video
Watch the procedure on YouTube
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
ThinkEdge SE360 V2 User Guide
280
"Install a memory module" on page
"Node cover replacement" on page
280.
"Change the machine type for operating in an enclosure (trained technician only)"
https://glosse4lenovo.lenovo.com/wiki/glosse4lenovo/view/How%20To/
"Set the TPM policy" on page
"Enable UEFI Secure Boot" on page
"Manage the Self Encryption Drive Authentication Key (SED AK) " on
"Manage the Self Encryption Drive Authentication Key (SED AK) " on page
"System Lockdown Mode" on page
196.
197.
"Configuration guide" on page
https://pubs.lenovo.com/lxcc-overview/
https://download.lenovo.com/servers_
for more details.
283.
360.
190.
54.
"Update the Vital Product
Update
.
for the details.
284.
"Activate or unlock the