Lenovo ThinkEdge SE360 V2 User Manual page 248

Figure 254. Removing the PCIe adapter
Step 4. Disconnect all the cables from the PCIe cabled riser card.
Step 5. Remove the PCIe cabled riser card from the riser cage.
a. Loosen the two screws that secure the riser card.
b. Remove the riser card.
Figure 255. Removing the riser card
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Remove components from the right wing of riser assembly
Follow instructions in this section to remove components from the right wing of riser assembly.
About this task
S002
ThinkEdge SE360 V2 User Guide
238
"Install components to the left wing of riser assembly" on page 247.