Lenovo ThinkEdge SE360 V2 User Manual page 265

Figure 273. Installing Backplane 2
After this task is completed
• Reinstall the riser assembly to the node. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install PCIe assembly + geotracking module
Important: Geotracking module is a Third Party device. As such, third party options are excluded from
Lenovo Statement of Limited Warranty. Engage third party for support. See ThinkEdge SE360 V2 Product
Guide on
https://lenovopress.lenovo.com/
Procedure
Step 1. Install the PCIe cabled riser card to the riser cage.
a. Align the riser card with the guide pins on the riser cage; then, push the riser card towards the
riser cage until it is firmly seated.
b. Secure the riser card with two screws.
"Install the riser assembly to the node" on page
for more information.
.
Chapter 5 Hardware replacement procedures
259.
255