Table of Contents
Advertisement
Figure 337. Inserting the cable holder
Step 8.
Gently remove the cables from the cable guide and the cable clip on the chassis.
Step 9.
Remove the SMA assembly from the node.
a.
Loosen the screw that secures the SMA assembly.
b.
Lift the SMA assembly to remove it.
Figure 338. Removing the SMA assembly
Step 10. Loosen the screw that secures the bracket; then, separate the bracket from the SMA assembly.
Figure 339. Removing the bracket
Step 11. Loosen the cables with the wrench; then, remove the cables from the bracket.
ThinkEdge SE360 V2 User Guide
310
Advertisement
Table of Contents
Troubleshooting
