• Read
"Installation Guidelines" on page 47
work safely.
Note: If there is no front shipping bracket installed, start from
page
56.
Remove the front shipping bracket
Procedure
Step 1.
Loosen the captive screws of the shipping bracket.
a.
Loosen the three captive screws on the front.
b.
Loosen the four captive screws on both sides.
c.
Loosen the captive screw on the top.
Figure 22. Loosening the screws
Step 2.
Pull the shipping bracket to remove it from the enclosure.
Figure 23. Removing the shipping bracket
Remove the node from the enclosure
S002
ThinkEdge SE360 V2 User Guide
56
and
"Safety inspection checklist" on page 48
"Remove the node from the enclosure" on
to ensure that you