Lenovo ThinkEdge SE360 V2 User Manual page 186

Slots on I/O module board
Slot 2 / M.2 Bay 1
1
Slot 1 / M.2 Bay 0
2
Step 2. If necessary, install an M.2 heat sink to the M.2 drive to be installed. See
on page 185.
Step 3. Install the M.2 drive.
a. Hold the M.2 drive at an angle, and insert the drive into the M.2 slot.
b. Lower the rear side of the M.2 drive down to the M.2 adapter.
c. Secure the M.2 drive with one screw.
Note: If necessary, repeat this procedure to the other M.2 drive to be installed.
Figure 182. Installing an M.2 drive
After this task is completed
Complete the parts replacement. See
Demo Video
Watch the procedure on YouTube
ThinkEdge SE360 V2 User Guide
176
"Complete the parts replacement" on page
"Install an M.2 heat sink"
324.