Table of Contents
Advertisement
Figure 196. Memory modules and processor layout
Important: Before removing DIMM 1, remove DIMM 2 first.
Step 3.
Open the retaining clip with a memory module tool.
Attention:
• Due to space constraints, use a memory module tool to open the retaining clips. Do not use
pencils or other fragile tools. When you received your server, the memory module tool is in the
material box.
• To avoid breaking the retaining clips or damaging the memory module slots, handle the clips
gently.
a.
Place the tip of the tool in the recess on the top of the retaining clip.
b.
Carefully rotate the retaining clip away from the DIMM slot to disengage the memory
module. One end of the module will be slightly higher than the other.
ThinkEdge SE360 V2 User Guide
188
Advertisement
Table of Contents
Troubleshooting
