Lenovo ThinkEdge SE360 V2 User Manual page 328

Figure 351. Cable routing for wireless adapter
Note: The orientation of the following table aligns with the above illustration.
Cable
Color
From
To
d. If applicable, remove the protection cover from the cable.
e. Gently press the cable connector down until it clicks in the connector on the WLAN module.
Note: Repeat this step to connect all the necessary cables to the wireless adapter.
ThinkEdge SE360 V2 User Guide
318
x86 WLAN x86 WLAN
3 4
#3 #4
Blue Black
SMA SMA
connector 3 connector 4
Connector 1 of Connector 2 of
x86 WLAN x86 WLAN
module module
XCC WLAN XCC WLAN
1 2
#1 #2
Gray White
SMA SMA
connector 1 connector 2
The left The center
connector of
connector of
XCC WLAN XCC WLAN
and Bluetooth and Bluetooth
module module
Bluetooth
5
#5
Black
Bluetooth
antenna
The right
connector of
XCC WLAN
and Bluetooth
module