Lenovo ThinkEdge SE360 V2 User Manual page 286

Figure 293. Removing the system board
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo Video
Watch the procedure on YouTube
Install the system board
Follow instructions in this section to install the system board.
About this task
Important: Removing and installing this component requires trained technicians. Do not attempt to remove
or install it without proper training.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the drive to any unpainted metal surface on the server;
then, remove the drive from the package and place it on a static-protective surface.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinkedge/se360v2/7dam/downloads/driver-list/
to see the latest firmware and driver updates for your server.
• Go to "Update the firmware" on page 350
Procedure
ThinkEdge SE360 V2 User Guide
276
"Install the system board" on page
and "Safety inspection checklist" on page 48
for more information on firmware updating tools.
276.
to ensure that you