Table of Contents
Advertisement
Figure 310. Installing the WLAN/Bluetooth module heat sink
After this task is completed
1. Reinstall the wireless adapter. See
2. Complete the parts replacement. See
Install the wireless adapter
Follow instructions in this section to install the wireless adapter.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
ThinkEdge SE360 V2 User Guide
294
"Install the wireless adapter" on page
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 48
294.
324.
to ensure that you
Advertisement
Table of Contents
Troubleshooting
