Table of Contents
Advertisement
Figure 305. Removing the WLAN/Bluetooth module
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the WLAN/Bluetooth modules
Follow instructions in this section to install the WLAN/Bluetooth modules.
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
About this task
Attention:
• Read
"Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AooAU9z6S2EXObfHoLImDm
Procedure
Step 1.
Locate the slot on the wireless adapter to install the WLAN/Bluetooth module.
"Install the WLAN/Bluetooth modules" on page
and
"Safety inspection checklist" on page 48
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
291.
.
Chapter 5
Hardware replacement procedures
to ensure that you
291
Advertisement
Table of Contents
Troubleshooting
