Lenovo ThinkEdge SE360 V2 User Manual page 362

Tool
Lenovo XClarity
Administrator
(LXCA)
Lenovo XClarity
Integrator (LXCI) for
VMware vCenter
Lenovo XClarity
Integrator (LXCI) for
Microsoft Windows
Admin Center
Lenovo XClarity
Integrator (LXCI) for
Microsoft System
Center Configuration
Manager
Notes:
1. For I/O firmware updates.
2. For BMC and UEFI firmware updates.
3. Drive firmware update is only supported by the tools and methods below:
• XCC Bare Metal Update (BMU): In-band, and requires system reboot.
• Lenovo XClarity Essentials OneCLI:
– For drives supported by ThinkSystem V2 and V3 products (legacy drives): In-band, and does not require
system reboot.
– For drives supported only by ThinkSystem V3 products (new drives): Staging to XCC and complete the
update with XCC BMU (In-band, and requires system reboot.).
4. Bare Metal Update (BMU) only.
• Lenovo XClarity Provisioning Manager
From Lenovo XClarity Provisioning Manager, you can update the Lenovo XClarity Controller firmware, the
UEFI firmware, and the Lenovo XClarity Provisioning Manager software.
Note: By default, the Lenovo XClarity Provisioning Manager Graphical User Interface is displayed when
you start the server and press the key specified in the on-screen instructions. If you have changed that
default to be the text-based system setup, you can bring up the Graphical User Interface from the text-
based system setup interface.
For additional information about using Lenovo XClarity Provisioning Manager to update firmware, see:
ThinkEdge SE360 V2 User Guide
352
Update Core
Methods System
Suppor-
Firmware
ted Updates
In-band
√
1
Out-of-
band
2
Off-Target
Out-of-
√
band
Off-Target
In-band
√
Out-of-
band
On-Target
Off-Target
In-band
√
On-Target
I/O Drive
Devices Firmware
Updates
Firmware
Updates
All I/O
devices
Selected I/
O devices
All I/O
devices
All I/O
devices
Graphical Command
user line
interface interface
√
√
√
√
Supports
Static
Bundles
(Service
Packs)
√
√
√