Table of Contents
Advertisement
Figure 82. Installing the bottom plate
Step 6.
Secure the DIN rail clips to the node sleeve with two screws for each clip.
Figure 83. Installing the DIN rail clips
Step 7.
If applicable, fully extend the SMA connectors, and install the WLAN antennas. See
WLAN antennas" on page
Step 8.
Mount the node sleeve to the DIN rail.
a.
Hook the top side of DIN rail clips onto the rail at an angle.
b.
Pivot the node sleeve toward the DIN rail, and ensure the DIN rail clips are securely seated.
ThinkEdge SE360 V2 User Guide
92
321.
"Install the
Advertisement
Table of Contents
Troubleshooting
