Lenovo ThinkEdge SE360 V2 User Manual page 151

c. Remove the switch from the chassis.
Figure 143. Removing the fan direction switch
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the fan direction switch with cable
Follow instructions in this section to install the fan direction switch with cable.
About this task
S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
• Read "Installation Guidelines" on page 47
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Procedure
"Install the fan direction switch with cable" on page
and "Safety inspection checklist" on page 48
141.
.
Chapter 5 Hardware replacement procedures
to ensure that you
141