Lenovo ThinkEdge SE360 V2 User Manual page 139

Slot 11 / M.2 Bay 10
1
Slot 12 / M.2 Bay 11
2
Step 2. Remove the M.2 drive.
a. Loosen the screw that secures the M.2 drive.
b. Pivot the rear side of the M.2 drive away from the M.2 adapter.
c. Remove the M.2 drive from the slot.
Note: If necessary, repeat this procedure to the other M.2 drive to be removed.
Figure 132. Removing an M.2 drive
Remove the bottom M.2 cabled adapter
Procedure
Step 1. Disconnect all the cables from the bottom M.2 cabled adapter.
Step 2. Remove the bottom M.2 cabled adapter.
a. Loosen the six screws that secure the bottom M.2 cabled adapter.
b. Lift the bottom M.2 cabled adapter to remove it.
.
Chapter 5 Hardware replacement procedures
129