Step 6.
Loosen the screw that secures the bracket; then, separate the bracket from the SMA assembly.
Figure 329. Removing the bracket
Step 7.
Loosen the cables with the wrench; then, remove the cables from the bracket.
Figure 330. Loosening the cables from the bracket
After this task is completed
• Install a replacement unit. See
• After completing the task with the wrench that comes in the PMB air baffle, store the wrench back to the
PMB air baffle for future use, and secure the wrench with one screw.
Figure 331. Storing the wrench
ThinkEdge SE360 V2 User Guide
306
"Install the SMA assemblies" on page
311.