Table of Contents
Advertisement
Figure 326. Pivoting the cable holder
e.
Press the side of the cable holder; then, insert the cable holder to the slot on the wireless
adapter.
Figure 327. Inserting the cable holder
Step 4.
Gently remove the cables from the cable guide and the cable clip on the chassis.
Step 5.
Remove the SMA assembly from the node.
a.
Loosen the screw that secures the SMA assembly.
b.
Lift the SMA assembly to remove it.
Figure 328. Removing the SMA assembly
.
Chapter 5
Hardware replacement procedures
305
Advertisement
Table of Contents
Troubleshooting
