Table of Contents
Advertisement
Slot 4 / M.2 Bay 3
1
Slot 6 / M.2 Bay 5
2
b.
Loosen the screw that secures the M.2 drive.
c.
Pivot the rear side of the M.2 drive away from the M.2 adapter.
d.
Remove the M.2 drive from the slot.
Figure 246. Removing an M.2 drive
Note: If necessary, repeat this procedure to other M.2 drives to be removed.
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove PCIe assembly
Procedure
Step 1.
Remove the PCIe adapter from the riser cage.
a.
Loosen the screw that secures the holder, and remove the holder.
b.
Loosen the screw that secures the PCIe adapter.
c.
Slide the PCIe adapter outward to remove it.
Notes:
• If no PCIe adapter is to be installed to this slot, insert the PCIe filler and secure it with one screw.
• If no PCIe adapter is to be installed to this slot, to save the holder for future use, insert the holder
to the slot on riser cage, and secure the holder with one screw.
ThinkEdge SE360 V2 User Guide
234
"Install components to the left wing of riser assembly" on page
247.
Advertisement
Table of Contents
Troubleshooting
