Lenovo ThinkEdge SE360 V2 User Manual page 246

Figure 249. Removing Backplane 2
Step 3. Loosen the three screws that secure Backplane 1; then, lift Backplane 1 to remove it.
Figure 250. Removing Backplane 1
After this task is completed
• Install a replacement unit. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove PCIe assembly + geotracking module
Important: Geotracking module is a Third Party device. As such, third party options are excluded from
Lenovo Statement of Limited Warranty. Engage third party for support. See ThinkEdge SE360 V2 Product
Guide on
https://lenovopress.lenovo.com/
Procedure
Step 1. Remove the geotracking module.
a. Push the latch to disengage the geotracking module.
b. Lift the geotracking module from the cage.
ThinkEdge SE360 V2 User Guide
236
"Install components to the left wing of riser assembly" on page
for more information.
247.