Lenovo ThinkEdge SE360 V2 User Manual page 230

Hide thumbs Also See for ThinkEdge SE360 V2:

Table of Contents

• Do not let the pull tapes be bent or covered. Make sure the pull tapes are on the upper side of

the power module board.

• Make sure that the slots for PMB air baffle are not interfered by the cables between the power

module board and the PIB module.

Figure 233. The slots for PMB air baffle

Secure the power module board with three screws.

Figure 234. Securing the power module board

Connect the PMB LED cable to the power module board.

ThinkEdge SE360 V2 User Guide

Troubleshooting