Lenovo ThinkEdge SE360 V2 User Manual page 335

Figure 360. Installing the header
10. If the security LED of the server is blinking, activate or unlock the system. See
system" on page 357.
11. Power on the server and any peripheral devices. See
12. Update the server configuration.
• Download and install the latest device drivers:
• Update the system firmware. See
• Update the UEFI configuration. See
• Reconfigure the disk arrays if you have installed or removed a hot-swap drive or a RAID adapter. See
https://pubs.lenovo.com/lxpm-overview/
"Power on the server" on page
http://datacentersupport.lenovo.com
"Update the firmware" on page
https://pubs.lenovo.com/uefi-overview/
for the LXPM documentation compatible with your server.
"Activate or unlock the
350.
.
.
Chapter 5 Hardware replacement procedures
53.
.
325