Checking The Status Of The Hsp Ports - Nortel 1000E Installation And Configuration Manual

Page 282 of 488

Checking the status of the HSP ports

553-3041-210 Standard 4.00
Verifying the network
System response:
PING 192.11.0.104 SUCCESSFUL
9 Exit from LD 117. Enter the command:
****
Use LD 137 STAT HSP command to check the status of the HSP. The
following is a sample output of the STAT HSP command.
LD 137
.stat hsp
HSP LINK CARRIER: OK
Auto Negotiation: Enabled
Auto Negotiation Completed: YES
Actual Line Speed: 1000 Mbps
Actual Duplex Mode: Full Duplex
LCS HSP STATE is UP
Ethernet (gei unit number 1):
Internet address: 127.2.0.2
Broadcast address: 127.255.255.255
Ethernet address: 00:c0:8b:07:a5:9f
Netmask: 0xff000000; Subnetmask: 0xff000000
September 2007
End of Procedure