Nortel 1000E Installation And Configuration Manual page 217

Configuring the CS 1000E Call Server
2 Enter the Signaling Server Node IP address in the Address Bar of the
browser window, and press Enter on the keyboard.
Note: The ELAN network interface IP address may be required, instead
of the Node IP address, to access the Element Manager login web page
in secure environments.
3 Element Manager opens with the Login web page (see Figure 76).
Note: If a security certificate has been correctly installed, and the usage
rule set to "UserChoice", the user will have the option of logging in using
Secure mode. If the usage rule is set to "Always", the user will be
redirected to the https site, and a warning message will appear.
a. Enter a valid User ID and Password combination.
Note: A valid User ID and Password combination is one which is
defined on the Call Server.
The IP Address of the Call Server appears in the Call Server IP
Address field.
b. Click Login.
Communication Server 1000E
Page 217 of 488
Installation and Configuration