Pc Card Interface; Installing Software On An Mg 1000E - Nortel 1000E Installation And Configuration Manual

Installing software on an MG 1000E

Small System Controller
Contents
Introduction

PC card interface

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing software on an MG 1000E SSC . . . . . . . . . . . . . . . . . . . . . .
This chapter describes the software installation on the Small System
Controller (SSC) in an MG 1000E using the software delivery card.
The SSC card has a PC card interface through a socket located on its
faceplate. The PC card socket can accommodate a Software Delivery card
used for software upgrading and for backup data storage. This chapter
contains Procedure 59: "Installing software on an MG 1000E SSC" on
page 236.
CAUTION — Service Interruption
The Nortel Networks Communication Server 1000E
Release 4.5 software must be installed prior to installing
the SSC software in the Media Gateways.
Media Gateways can be installed in any order.
Communication Server 1000E
Page 235 of 488
Installation and Configuration
235
236