Nortel 1000E Installation And Configuration Manual page 412

Table 53
LD 11 – Configure an IP Phone. (Part 1 of 4)
Prompt
REQ:
TYPE:
TN
DES
CUST
ZONE
CLS
2 Enter the appropriate responses shown in Table 53.
Response Description
NEW CHG Add new or change existing data
i2001 For IP Phone 2001, IP Phone 2002, IP Phone 2004, or
i2002 IP Softphone 2050. CS 1000E accepts this response if it
i2004 is equipped with packages 88 and 170.
i2050
Terminal Number
l s c u Format for CS 1000E, where:
l = 0, 4, 8, - 252: superloop number in multiples of 4
s = 0-1: MG 1000E on superloop
c = 1-4, 7-10
u = 0-31, (see Table 64 on
c u Format for MG 1000T, where:
c = 0-4, 7-10, 11-14, 17-24, 27-34, 37- 44, 47-50
u = 0-31
d...d Office Data Administration System Station Designator
xx Customer number as defined in LD 15
0-255 Zone number to which this IP Phone belongs
ADD Class of Service
ADD - Automatic Digit Display, (default for IP Phone)
For a complete list of responses, refer to Software Input/
Output: Administration (553-3001-311).
Communication Server 1000E
Installing and configuring IP Phones
Page 412 of 488
page 485)
Installation and Configuration