Nortel 1000E Installation And Configuration Manual page 256

Page 256 of 488
Table 15
Customer made cable pin out
Pins on DB9 Female
3
4
5
7
8
9
553-3041-210 Standard 4.00
Connecting a Terminal Server
TXD
DTR
S GND
RTS
CTS
N/C
Procedure 62
Connecting a Terminal Server to the system
1 Connect the MRV P/N-151-3028 serial cable from the Terminal Server
console port 20 to the PC COM port.
WARNING
Port 20 is the default console port. Do not change the
configuration for port 20.
2 Plug MRV PC Card (in MRV package) into Terminal Server faceplate
socket, and power on the Terminal Server.
3 Start the MRV HyperTerminal application. In Windows:
Start > Programs > Accessories > Communication >
HyperTerminal.exe
4 Configure HyperTerminal to communicate with the Terminal Server's
management port:
September 2007
Pins on RJ45 Male (MRV Terminal Server)
6
7
4
5
1
8
RxD
DSR/DCD
TxD GND
RxD GND
CTS
RTS