Section A: Led And Hex Displays; Status Leds And Hex Display Location - Nortel CallPilot 202i Maintenance And Diagnostics

18 Chapter 3 Troubleshooting your CallPilot system
•
The HEX display displays messages that appear during startup or normal
202i server operation.
For more information, see
Startup sequence and diagnostic codes
To help you determine if the 202i server started successfully (or if it failed),
watch the startup sequence and the diagnostic codes that appear. The
entire sequence occurs when you perform of the following:
•
•
•
For more information, see

Section A: LED and HEX displays

In this section
"Status LEDs and HEX display location" (page 18)
"Interpreting the power status LED" (page 19)
"Interpreting the network and drive activity LEDs" (page 20)
"Interpreting the HEX display" (page 22)

Status LEDs and HEX display location

The following diagram shows the location of the status LEDs and HEX
display on the 202i server faceplate.
Copyright © 2009, Nortel Networks
.
network activity is occurring
Lock the 202i server against the switch backplane. When locked against
the backplane, the 202i server begins receiving power.
Restart the operating system.
Press Reset on the 202i server faceplate to restart the hardware.
Nortel CallPilot
202i Server Maintenance and Diagnostics
NN44200-708 01.02 Standard
5.0 11 August 2009
"Section A: LED and HEX displays" (page
"Section B: Startup diagnostics" (page
18).
25).