Nortel 1000E Installation And Configuration Manual page 80

Rack-mounting the components
Page 80 of 488
553-3041-210 Standard 4.00
Procedure 3
Rack-mounting a Media Gateway or Media Gateway Expander
1 Fasten the right guide bracket to the right rack support.
a. Insert two #10-32 machine screws into the two middle slots in the
guide bracket and into the respective holes in the right rack support.
See Figure 16.
b. Fasten the screws.
Figure 16
Guide bracket installed in a rack
2 Fasten the left guide bracket to the left rack support.
a. Insert two #10-32 machine screws into the two middle slots in the
bracket and into the respective holes in the left rack support.
b. Fasten the screws.
September 2007
#10-32