Configuring A Terminal Server - Nortel 1000E Installation And Configuration Manual

Configuring a Terminal Server

Table 15
Customer made cable pin out
Pins on DB9 Female
1
6
2
• Procedure 65: "Accessing a CS 1000E from a PC through telnet
Terminal Server" on
• Procedure 66: "Configuring a transparent rlogin port" on
• Procedure 68: "Accessing an MRV Console Port through the
on-board modem" on
Follow Procedure 62 to connect a Terminal Server with a CS 1000E system.
Table 14 lists the MRV cables required to install the IR-8020M-101 Terminal
Server in a CS 1000E system.
Table 14
Required MRV serial cables and connectors
Order Code
NTDU6302
NTDU6303
P/N-151-3028
P/N-350-0308
Customer-made cables with the following pin out (as NTDU6302) can also
be used. See Table 15.
DCD
DSR
RXD
Communication Server 1000E
Connecting a Terminal Server
page 259
page 264
Description
Connects MRV Terminal Server to any
standard DTE port or DCE port when a Null
modem is used
Used for telnet, rlogin connections
Male RJ-45 to Male RJ-45 with connectors,
10 feet
Female RJ-45 to Female DB9
Pins on RJ45 Male (MRV Terminal Server)
2
3
Page 255 of 488
page 260
DTR
TxD
Installation and Configuration