Nortel 1000E Installation And Configuration Manual page 159

Connecting MG 1000T system components
8 MG 1000T Expansion 3 and 4 network cables (NTDU0609) must be
routed from the 100 BaseT daughterboard through the cable slot on the
side of the MG 1000T Core with one ferrite on the inside of the Media
Gateway and the second ferrite external to the Media Gateway as shown
in Figure 39 on page
the 100BaseT RJ-45 connector 1 on the back of each Media Gateway.
Note 3: The NTDU0609 crossover cables are connected directly to the
MG 1000T Core 100BaseT Daughterboards for MG 1000T Expansion 3
and 4.
Note 4: The required NTDU0609 crossover cables are contained in the
NTDU19BA Cable Kit.
Figure 39
MG 1000T SLAN subnet cables
100BaseT cable to
MG 1000T #1
MG 1000T #2
MG 1000T #3
MG 1000T #4
9 Connect the MG 1000T Core ports, shown in Figure 40 on
the data network switch using a CAT5 patch cable.
Note: A customer supplied standard CAT5 cable is required.
Communication Server 1000E
159. Connect to MG 1000T Expansion 3 and 4 using
Cable slot for NTDU0609 cables
to MG 1000T Expansion 3 and 4
Page 159 of 488
page 160
Installation and Configuration
to