Nortel 1000E Installation And Configuration Manual page 171

Installing and configuring the Signaling Server software
a. Click Software Downloads in the Support & Training menu. The
Technical Support page appears.
b. Click Product Families. The Products Families list appears.
c. Click Succession. The By Product Family page opens.
d. Under the Succession Enterprise > Signaling Server and IP Peer
Networking headings, click Software.
3 Download the Signaling Server CD image.
a. Click on the link for the appropriate Signaling Server CD image.
The CD-ROM image includes the Signaling Server software as well
as IP Phone firmware and Voice Gateway Media Card loadware.
b. If not logged in to a My Nortel account, click on Log In to sign in.
Note: If you are not registered to access this web site, refer to the
CS 1000 product bulletin for directions on how to register.
c. The Software: Software Details Information page appears. Click
the link next to File Download.
d. In the Save As window, choose the desired path to save the file to
the local disk on your PC and click Save.
Procedure 43
Creating a Signaling Server Software CD-ROM
1 Use the software option to "burn" or "create" a CD from the CD image. Do
not drag-and-drop, as this can result in a file copy and a CD-ROM that
does not work. Do not write the ISO file to the CD-ROM.
Note: Select the disk-at-once write option.
2 Close the session.
3 Label the CD appropriately, for example, Signaling Server, sse-x.xx.xx.
The Software CD-ROM must be readable in a standard CD-ROM drive. After
you create a CD from the CD image, the CD contains several directories and
Communication Server 1000E
End of Procedure
End of Procedure
Installation and Configuration
Page 171 of 488