Nortel 1000E Installation And Configuration Manual page 212

Page 212 of 488
LD 117 – Bandwidth management zone commands
Command
NEW ZONE xxx p1 p2 p3 p4 p5
NEW ZONE xxx
CHG ZONE xxx p1 p2 p3 p4 p5
OUT ZONE xxx
DIS ZONE xxx
ENL ZONE xxx
PRT ZONE xxx
553-3041-210 Standard 4.00
Configuring the CS 1000E Call Server
Description
Create a new zone, where:
xxx = zone number = (0) - 255.
p1 = Intrazone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p2 = Intrazone preferred strategy
= (BQ for Best Quality) or BB for Best Bandwidth
p3 = Interzone available bandwidth
= 0 - (10 000) - 100 000 (Kbps)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
Create a new zone with default values for the parameters:
p1 = 10 000 (Kbps)
p2 = BQ
p3 = 10 000 (Kbps)
p4 = BQ
p5 = shared
Change parameters of a zone. All parameters, including
those that are unchanged, must be re-entered.
Remove a zone.
Disable a zone. When a zone is disabled, no new calls are
established inside, from, or toward this zone.
Enable a zone.
Print zone and bandwidth information.
September 2007
End of Procedure