Nortel 1000E Installation And Configuration Manual page 122

Page 122 of 488
553-3041-210 Standard 4.00
Installing software on the CS 1000E
The Fix Media Device on Core 0 is blank.
Install
is partitioned.
Note: INSTALL WILL REBOOT AFTER THIS
PROCEDURE AND
PARTITION IT.
THE DRIVE AT THIS TIME.
Please enter:
<CR> -> <a> - Partition the Fix Media Device.
Enter choice>
>Repartitioning Fix Media Device ...
fdiskPartCreate(0x12d5ff0c, 1, 4, 0x10)
Size in sectors = 0x8000
Low boundary = 0
High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 2, 11, 0x130)
Size in sectors = 0x98000
Low boundary = 0x7fc1
High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 3, 11, 0x130)
Size in sectors = 0x98000
Low boundary = 0x9ffc1
High boundary = 0x1e8bdf
fdiskPartCreate(0x12d5ff0c, 4, 11, 0x130)
Size in sectors = 0x98000
September 2007
cannot continue
FIX MEDIA WILL BE EMPTY AFTER YOU
INSTALL REMOVABLE MEDIA MUST BE IN
unless the FMD