Adding A 100Baset Daughterboard (Single Port) - Nortel 1000E Installation And Configuration Manual

Adding a 100BaseT daughterboard (single port)

Figure 83
100BaseT daughterboard (single port) (NTDK99)
NTDU0606
Ethernet cable
Configuring a Small System Controller
Follow Procedure 58 to add a 100BaseT daughterboard (single port) to a SSC
for MG 1000T 1 to 4.
Note: The NTDK99 is only used in an MG 1000T.
Procedure 58
Adding a 100BaseT daughterboard (single port) to an SSC
CAUTION WITH ESDS DEVICES
Static electricity can damage circuit cards. Wear an
antistatic wrist strap when handling circuit cards or any of
their components.
1 Unpack the 100BaseT daughterboard (single port) (NTDK99) and the
NTDU0606 cable (see Figure 83).
Communication Server 1000E
Page 231 of 488
Installation and Configuration