Nortel 1000E Installation And Configuration Manual page 409

Table 50
Bandwidth management zones configuration commands in LD 117
Command
NEW ZONE xxx p1 p2 p3 p4 p5
NEW ZONE xxx
CHG ZONE xxx p1 p2 p3 p4 p5
OUT ZONE xxx
DIS ZONE xxx
ENL ZONE xxx
PRT ZONE xxx
5 Exit from LD 117. Enter the command:
****
Description
Create a new zone, where:
xxx = zone number = (0) - 255.
p1 = Intrazone available bandwidth
= 0 - (10000) - 100000 (Kbps)
p2 = Intrazone preferred strategy
= (BQ for Best Quality) or BB for Best Bandwidth
p3 = Interzone available bandwidth
= 0 - (10000) - 100000 (Kbps)
p4 = Interzone preferred strategy
= BQ for Best Quality or BB for Best Bandwidth
p5 = Zone resource type
= (shared) or private
Create a new zone with default values for the parameters:
p1 = 10000 (Kbps)
p2 = BQ
p3 = 10000 (Kbps)
p4 = BQ
p5 = shared
Change parameters of a zone. All parameters must be
re-entered, even those that are unchanged.
Remove a zone.
Disable a zone. When a zone is disabled, no new calls are
established inside, from, or toward this zone.
Enable a zone.
Print zone and bandwidth information.
Communication Server 1000E
Installing and configuring IP Phones
Page 409 of 488
Installation and Configuration