Setting The Tty Terminal Port; Traditional Terminal Sdi Connection - Nortel 1000E Installation And Configuration Manual

Page 268 of 488

Setting the TTY terminal port

Traditional terminal SDI connection

553-3041-210 Standard 4.00
Configuring a terminal and SDI ports
A TTY terminal can be any standard PC running terminal software, (for
example, HyperTerminal). The TTY terminal port must be configured as:
• Bits per second - Baud rate must be the same as the speed of SDI port.
• Data bits - 8
• Parity- None
• Stop bit – 1
• Flow control – None
• Terminal Emulation- VT100
Figure 87 shows the setup values for a traditional terminal setup.
September 2007