Introduction - Nortel 1000E Installation And Configuration Manual

Introduction

The following IP Phones can be installed on a CS 1000E system:
• Nortel IP Phone 2001
• Nortel IP Phone 2002
• Nortel IP Phone 2004
• Nortel IP Softphone 2050
• Nortel IP Phone 2007
• IP Audio Conference Phone 2033
• WLAN Handsets 2210/2211/2212
• MVC 2050
The system must be configured before the IP phones can be installed. The
configuration includes:
• The IP Phone TN blocks must be defined on the Call Server (See
"Configuring VoIP bandwidth management zones" on
"Using Set-Based Installation" on
• The IP Phones are assigned to an IP telephony node, and use the IP
telephony node properties defined using Element Manager (see
"Configuring an IP telephony node" on
• The IP Phones require local boot parameter configuration (see
"Configuring the IP Phone boot parameters" on
Communication Server 1000E
Installing and configuring IP Phones
page
Page 396 of 488
page 408
433).
page 365).
page 424).
Installation and Configuration
or