Nortel 1000E Installation And Configuration Manual page 378
Nortel 1000e server: install guide
Hide thumbs
Also See for 1000E:
- Upgrade (230 pages) ,
- Maintenance manual (222 pages) ,
- Regulatory and safety information (2 pages)
Table of Contents
Advertisement
Page 378 of 488
553-3041-210
Standard 4.00
Configuring an IP telephony node
Figure 137
Transfer / Status web page
The previous status of the node displays, and the failure reason is
displayed for elements in nodes that failed to get configuration files
(BOOTP.TAB and CONFIG.INI) from the CS 1000E.
The Transfer / Status web page has five buttons:
•
Selected All. Selects all the elements in the node (that is, it adds a
check mark in each element's check box).
•
Unselect All. Unselects all the elements in the node (that is, it
removes the check marks for all the selected elements).
•
Transfer to Selected Elements. Re-transfers node configuration
files only to selected elements, regardless of a "Transfer Failed"
state.
•
Transfer to Failed Elements. Transfers only node configuration files
to elements in a "Transfer Failed" state. The Transfer to Failed
Elements button is displayed only when at least one element on the
Node failed to transfer either a BOOTP.TAB or CONFIG.INI in the
previous operation.
September 2007
Advertisement
Chapters
Table of Contents
