Nortel 1000E Installation And Configuration Manual page 437

installed, you can still choose it as the audio device from the Configuration
Utility.
Procedure 112
Installing the USB Headset Kit
1 Connect the coiled lower cord to the headset cord with the Quick
Disconnect connector. Ensure the Quick Disconnect is securely fastened.
2 Connect the headset cord to the RJ9 jack on the adaptor.
3 Connect the USB cable to the headset adaptor and to one of the USB
jacks at the back of your PC or USB hub.
The first time the headset adapter is plugged in, there is a delay while
Windows
During the installation you can be prompted to supply the original Windows
CD-ROM so that Windows can locate the required drivers.
Installing the IP Softphone 2050 application
Procedure 113
Installing the IP Softphone 2050 on your PC
1 Insert the CD-ROM disk into the CD-ROM drive of your PC.
Note: Installation should proceed automatically. If it does not, then
continue with step 1. Otherwise go directly to step 5.
2 On the PC desktop, double-click the My Computer icon.
3 Double-click the CD icon.
4 Double-click the Setup icon.
5 Follow the prompts that appear on the screen.
6 Run the IP Softphone 2050 Configuration Utility to assign a server
address, select sound devices, and select a server type.
Installing and configuring IP Phones
End of Procedure
®
configures the device and locates appropriate driver software.
End of Procedure
Communication Server 1000E
Page 437 of 488
Installation and Configuration