Nortel 1000E Installation And Configuration Manual page 120
Nortel 1000e server: install guide
Hide thumbs
Also See for 1000E:
- Upgrade (230 pages) ,
- Maintenance manual (222 pages) ,
- Regulatory and safety information (2 pages)
Table of Contents
Advertisement
Page 120 of 488
Installing the software
553-3041-210
Standard 4.00
Installing software on the CS 1000E
Systems and components delivered to customer sites
may include preinstalled software. However, the
pre-installed software versions are typically older and are
included only for manufacturing and order management
purposes. Do not attempt to operate the system with
the pre-installed software. You must download the
latest software from the Nortel Software Download web
site and install the software as part of the installation
process.
This section provides the steps involved in installing CS 1000 Release 4.5 for
the CP PIV.
Procedure 22
Installing the software on the Call Server
1
Check that a terminal is connected to COM1 on the Call Server.
2
Insert the RMD into the CF card slot.
3
Press the manual RESET button on the CP PIV card faceplate in the Call
Server. EPE blocking message is possible.
4
Enter <CR> at the Install Tool Menu.
September 2007
IMPORTANT!
Advertisement
Chapters
Table of Contents
