Nortel 1000E Installation And Configuration Manual page 431

c. Press the OK key to accept your selection.
The IP Phone prompts:
DHCP? (0-No, 1-Yes): 0
4 Enter 1 to use DHCP.
The IP Phone prompts:
DHCP:0-Full, 1-Partial:0
5 Enter the 1 to use Partial DHCP.
The IP Phone prompts:
S1 IP: x.x.x.x
6 Enter the Server 1 IP (node IP).
The IP Phone prompts:
S1 PORT: 4100
7 Enter the Server 1 port.
The IP Phone prompts:
S1 ACTION: 1
8 Enter the Server 1 action.
The IP Phone prompts:
S1 RETRY COUNT: 10
9 Enter the Server 1 retry count.
The IP Phone prompts:
S2 ...
10 Enter same information as for Server 1.
The IP Phone prompts:
VLAN?(0-No,1-Ma,2-Au)0
Communication Server 1000E
Installing and configuring IP Phones
Page 431 of 488
Installation and Configuration