Nortel 1000E Installation And Configuration Manual page 187

Figure 64
Network Routing Service (NRS) — co-resident Signaling Server
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
<CR> -> <a> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
<b> - H.323 Gatekeeper only.
<c> - SIP Redirect/Proxy Server only.
<d> - None.
Enter Choice>
Installing and configuring the Signaling Server software
11 Select the Network Routing Service (NRS) to be provided by this
Signaling Server. See Figure 64 for a co-resident Signaling Server or
Figure 65 on page 188
• Enter a if this Signaling Server will provide an H.323 Gatekeeper and
a SIP Redirect/Proxy Server.
• Enter b if this Signaling Server will provide only an
H.323 Gatekeeper.
• Enter c if this Signaling Server will provide only a SIP Redirect/Proxy
Server.
• Enter d if this Signaling Server is a Leader Signaling Server and will
not provide an NRS. Go to step 13 on
Refer to IP Peer Networking: Installation and Configuration
(553-3001-213) for more information on the NRS.
Communication Server 1000E
for a stand-alone Signaling Server.
page
Installation and Configuration
Page 187 of 488
189.