Setting Administrator And Temporary Ip Telephone Installer Passwords - Nortel 1000E Installation And Configuration Manual

Setting administrator and temporary IP Telephone
Installer passwords
Table 54
IP Phone dedicated soft key assignment (Part 2 of 2)
IP Phone key number
Key 25
Key 26
4 Repeat Steps 2 and 3 for each IP Phone.
IP Phone Installer Passwords is an optional feature that provides protection
against unauthorized modification of the TN on the IP Phones. For detailed
information about the IP Phone Installer Passwords, see IP Line: Description,
Installation, and Operation (553-3001-365).
The IP Phone Installer Passwords are configured on either a Signaling Server
or a Media Card in a node. The passwords then apply to all components in the
node.
Procedure 105
Setting passwords for the administrator and temporary
IP Telephone Installer
Note: This procedure can also be performed from the CLI of a Signaling
Server or Media Card.
1 Log in to Element Manager.
2 Select IP Telephony > Nodes: Servers, Media Cards > Maintenance
and Reports from the navigator.
The Node Maintenance and Reports web page opens, as shown in
Figure 115 on page
Communication Server 1000E
Installing and configuring IP Phones
Response(s) Allowed
CHG, NUL
CHG – Charge Account key
CPN, NUL
CPN – Calling Party Number key
End of Procedure
340.
Page 417 of 488
Installation and Configuration