Nortel 1000E Installation And Configuration Manual page 474

Page 474 of 488
553-3041-210 Standard 4.00
Configuring MG 1000T survivability and alternate primary controller
3 Click Edit next to the desired node.
The Edit web page opens, as shown in Figure 100 on
4 Click LAN configuration.
The LAN configuration menu expands (see Figure 159 on
Figure 159
LAN configuration
5 Enter the Survivable Media Gateway IP address.
The IP address is the ELAN IP address of the survivable MG 1000T SSC
that this IP telephony node registers to if it loses the connection to the
MG 1000T Core.
6 Click Save and Transfer at the bottom of the Edit web page, then click
OK to save and transfer the changes.
September 2007
End of Procedure
page 323.
page 474).