Nortel 1000E Installation And Configuration Manual page 180

Nortel 1000e server: install guide
Hide thumbs Also See for 1000E:
Table of Contents

Advertisement

Page 180 of 488
Figure 55
Tested within 24 hours
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
The Install Tool has detected that the hard disk has been tested
recently.
It is recommended to skip the hard disk test. If you select to test
the hard disk anyway, it will take approximately 14 minutes.
Please enter:
<CR> -> <a> - Skip the hard disk test.
<b> - Test the hard disk.
Enter Choice> a
553-3041-210
Standard 4.00
Installing and configuring the Signaling Server software
The following messages display on the screen:
Testing hard disk ...
Testing partition /u (4194241 blocks) ...
xxx% complete
Testing partition /p (4194241 blocks) ...
xxx% complete
Hard disk testing succeeded.
Where xxx = 0 to 100.
Note: If the physical check did not pass, contact your technical support
group.
September 2007

Advertisement

Table of Contents
loading

Table of Contents