Nortel 1000E Installation And Configuration Manual page 193

Figure 73
IP Telephony parameter configuration
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
You have entered the following parameters for this Leader
Signaling Server:
Node ID
Hostname
ELAN IP
ELAN subnet mask: 255.255.255.0
ELAN gateway IP : 192.168.10.1
TLAN IP
TLAN subnet mask: 255.255.255.0
TLAN gateway IP : 192.168.20.1
Node IP
Call Server IP
NRS configuration: Alternate GK + SIP
Primary NRS IP
Alternate NRS IP : 192.168.20.24
Please enter:
<CR> -> <y> - Yes, these parameters are correct.
<n> - No, these parameters are not correct.
Enter Choice>
Installing and configuring the Signaling Server software
: 276
: SS_Node276_Ldr
: 192.168.20.100
: 192.168.20.20
: 192.168.20.100
: 192.168.10.10
: 192.168.20.10
The system echoes the ELAN network interface MAC address.
For future reference, the ELAN MAC address is:
"00:02:b3:c5:5l:c6".
This address is on the face of the Signaling Server, on the right side when
the bezel door is open.
Note: The ELAN network interface MAC address must be configured in
the Element Manager node configuration web page.
16 To complete the installation, the Installation Status Summary screen
appears as shown in Figure 74 on
Communication Server 1000E
page 194.
Installation and Configuration
Page 193 of 488