Verifying Ip Phone Functionality; Displaying Registered Ip Phones; Upgrading Firmware - Nortel 1000E Installation And Configuration Manual
Nortel 1000e server: install guide
Hide thumbs
Also See for 1000E:
- Upgrade (230 pages) ,
- Maintenance manual (222 pages) ,
- Regulatory and safety information (2 pages)
Table of Contents
Advertisement
Verifying IP Phone functionality
Displaying registered IP Phones
Upgrading firmware
You can now use the IP Phones. To test the telephones, make IP Phone-to-IP
Phone calls.
Follow Procedure 114 to display the IP Phones registered on a Signaling
Server or Voice Gateway Media Card.
Procedure 114
Displaying registered IP Phones in Element Manager
1
Log in to Element Manager.
2
Select System Status > IP Telephony from the navigator.
3
Click the desired node to expand it.
4
Click GEN CMD for the desired Signaling Server or Media Card.
a.
Select isetShow from the drop-down list box.
b.
If prompted, select the range of sets to display.
c.
Click RUN.
The status of all IP Phones registered on this Signaling Server or Media Card
is displayed.
Refer to the IP Line: Description, Installation, and Operation
(553-3001-365), to check for the latest IP Phone firmware version and how
to upgrade to the latest IP Phone firmware.
Communication Server 1000E
Installing and configuring IP Phones
End of Procedure
Page 439 of 488
Installation and Configuration
Advertisement
Chapters
Table of Contents
