Nortel 1000E Installation And Configuration Manual page 192

Page 192 of 488
Figure 71
Primary NRS IP address
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Primary NRS IP Address:
Primary NRS IP
Figure 72
Alternate NRS IP address
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please enter the Alternate NRS IP Address:
Alternate NRS IP :
553-3041-210 Standard 4.00
Installing and configuring the Signaling Server software
:
15 Enter y to confirm the parameters. See Figure 73 on
The example in Figure 73 is for a Leader Signaling Server configured with
an Alternate H.323 and SIP NRS. The confirmation screens for a Follower
and stand-alone Signaling Server are similar, showing the same list of
parameters, specifically:
• The screen for the Follower Signaling Server displays only the value
for the Hostname parameter; all other values are blank.
• The screen for the stand-alone Signaling Server displays values for
the Hostname, ELAN network interface, TLAN network interface, and
NRS parameters. The Node ID field is set to 0. The Call Server IP
field is set to 0.0.0.0.
September 2007
page 193.