Enabling The Multi-User Option - Nortel 1000E Installation And Configuration Manual

Page 206 of 488

Enabling the multi-user option

553-3041-210 Standard 4.00
Configuring the CS 1000E Call Server
Follow Procedure 49 to enable the multi-user option.
Procedure 49

Enabling the multi-user option

1 Enter the command:
LD 17
System response:
CFN000
MEM AVAIL: (U/P): 1015918 USED U P: 138773 24956
TOT: 1179647
DISK RECS AVAIL: 486
TMDI D-CHANNELS AVAIL: 0 USED: 0 TOT: 0
DCH AVAIL: 80 USED: 0 TOT: 80
AML AVAIL: 15 USED: 1 TOT: 16
2 Enter the command:
REQ chg
3 Enter the command:
TYPE ovly
....
4 Enter the command:
MULTI_USER on
System response:
MEM AVAIL: (U/P): 1015893 USED U P: 138773 24981
TOT: 1179647
DISK RECS AVAIL: 486
TMDI D-CHANNELS AVAIL: 0 USED: 0 TOT: 0
DCH AVAIL: 80 USED: 0 TOT: 80
AML AVAIL: 15 USED: 1 TOT: 16
5 Enter the command:
REQ ****
September 2007
End of Procedure